|
Contact us:
Key contact: Rowow Ren
ESOON CORPORATION LTD
Email: info@esoon.biz
Tel: 0086 21 3352 0911
Fax: 0086 21 3352 0912
|
Product Details
Product-Name：
Separated Pressurized Solar Water Heater
|
Model |
Capacity (L) |
Vacuum tube (Diameter-Length*NO.) |
Collector NO. |
Person |
|
ES-SFCY100 |
100 |
58-1800mm*12tubes |
1*12tubes |
1-2 |
|
ES-SFCY150 |
150 |
58-1800mm*18tubes |
1*18tubes |
2-3 |
|
ES-SFCY200 |
200 |
58-1800mm*24tubes |
1*24tubes |
3-4 |
|
ES-SFCY300 |
300 |
58-1800mm*36tubes |
2*18tubes |
4-5 |
|
ES-SFCY500 |
500 |
58-1800mm*60tubes |
2*30tubes |
6-8 |
Work principle:
1. The solar collector can connect to the pressured water tank and it can be installed on the flat with stand or mounting on the sloping roof without support stand.
2. The heat pipe vacuum tube absorbs the heat energy from sunlight, because there is a closed-loop between water tank and solar collector, so the heat can transfer to water tank from the solar collector.
3. The conduct medium is Glycol and water mixture, it can endure the very low temperature and anti freeze, meanwhile it can exchange heat energy with cold water in the water tank.
4. With help of the controller system, it can balance the temperature of the water tank and the solar collector. When the temperature difference is higher than preset value, the controller system will start the circulation pump and the heat energy can be transferred between the water tank and solar collector.
5. The controller can also control the electrical heater booster; the temperature can be preset with digital adjustor. When the T of the water in the water tank is higher than the preset value. It will start the electrical heater, when the temperature is higher than the preset value. The electrical heater will stop working.
6. The water tank has a very long insulation period, so the temperature of the hot water can be protected for 72hours.
I. Pressurized Vaccum Tube Solar collector- 10tubes, 12tubes, 15tubes, 18tubes, 20tubes, 24tubes and 30tubes
SC-01: Sloping roof
SC-02: Flat roof
u Aluminum alloy shell
u Heat pipe vacuum tube
u Nylon vacuum tube holder
u Silicon aluminum &polyurethane foam insulation
u Galvanized steel support stand
u Copper head-pipe
Features:
1. Suitable for both flat roof and slope roof.
2. Employing sliding way for the frame, much easier for installation, especially suitable for European-styled houses.
3. Still works as normal as before even one vacuum tube destroys.
4. Hailstone resistance: 25mm.
5. Higher efficient, stable performance, beautiful design.
6. It can endure 0.6Mpa high pressure.
7. It can be used for bathing, house heating and the swimming pool system.
II. Pressurized water tank (SPW, SPW-01 SPW-02)-100L, 150L, 200L, 250L, 300L, 400L, 500L, 700L, 1,000L and 1,500L
u SUS304-2B or SUS316 food grade or crystalline material inner tank
u Galvanized steel with polyester paint material outer tank:
u P/T valve, Magnesium anode bar
u Copper material or stainless steel heat-exchanger, single coil or double coil
u High density polyurethane foam Insulation:
u Electrical heater with thermostat
Feature:
1. It can operate under the high pressure and high temperature, and it has a very long life span.
2. The insulation layer of water tank consist of the high density polyurethane foam, the temperature can be protected for more than 72hours.
3. Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, with increased anode magnesium bar.
4. The anode bar to prevent furring, It is the true two in one. The product successfully carries out the installation of separation according to fabricating yard and is harmoniously blended with architecture.
5. It solves the problem of limited roof on the high building, and it has a large size volume which can provide the hot water for many people at the same time.
III. Microcomputer controller system or work station:
uDigital adjustor
uCirculation pump
uTemperature sensor
uTemperature and pressured probe
uExpansion tank
uFlowmeter
Feature:
1. It can display water temperature, solar collector’s temperature, water level in the water tank, and the status of the circulation pump.
2. It can control the circulation pump to employ the performance of heat transferring.
3. It can calculate the flow rate of the conduction medium so that you can control the system work.
4. It can reduce the pressure of the whole system that it can endure the water tank and solar collector operating safely.
Remark:
SFCY-01 has one coil inside the water tank,
SFCY-02 has double coil inside the tank.
Deal terms and conditions:
1. Delivery term: FOB Shanghai or CFR (Please inform your destination port)
2. Payment way: 30%TT deposit in advance, 70%TT balance before shipment (on FCL), sample need to be made 100%TT in advance)
3. MOQ: 3 sets
4. Delivery time: 25 days on 20 feet FCL, 30 days on 40 feet FCL
5. Delivery way: By sea
6. Package: carton (on FCL) or wooden box (on LCL)
7. Warranty: 36 months
8. Certificate: CE, ISO9001, EN12975 and Solar Keymark
9. Cooperate way: OEM or Dealer (Optional)
|